Tips On How To Maintain An RO System For Best Performance

A reverse osmosis system plays an important role in keeping the drinking water safe and takes off all the impurities while maintaining the best quality of water. It produces more filtered water to keep the ratio of various water-borne diseases low and maintain the good quality of life. Drinking safe and purified water is important to keep yourself guarded against various diseases. The acute water shortage of purified water causes a number of diseases which lower the energy levels, cause dehydration, various digestive disorders, infections, and toxic accumulation. Cleaning the waste water and making it hygienic is not a complex process anymore with the right RO system.

Despite many benefits, maintaining the RO system is necessary because there are many filter change schedule that you should not ignore. There are different types of filters naming sediment, reverse osmosis membrane, carbon, polishing, etc.

Here Is A Guide On How To Maintain The Filters For Clean Water Production:-

  • Sediment Filter – This one is installed at the pre-filtration stage, which has the core function of straining out the Sediments, Silt, Dirt, and various other impurities to get rid of the solid wastes. This is an important process as it prevents the blockage of delicate RO membranes. If you will not pay attention to this process, you will end up damaging the membrane of the RO and it becomes clogged and foul. The ideal time of replacing the filter is every 12 months from the installation.
  • Carbon Filter – This is designed in the system for removing the excessive amount of chlorine dissolved in the water. It basically removes the foul smell and enhances the taste of the water to bash the evil impact of chlorine on your health as well as on the RO membrane. The ideal time for replacing the filter is also every 12 months.
  • Reverse Osmosis Membrane – For all the additional contaminations, the RO membrane works well and as the water entering the membrane is purified to the great extent, you don’t need to replace it before two to three years of installation. However, it varies on the quality of the water and usage as well as the timely replacement of sediment and carbon filters.
  • Polishing Filter – The fourth and final stage of the water filtration process eliminates the remaining contaminations if any and enhances the taste. It also removes any foul smell left so you can get the great quality drinking water. The ideal time of replacing the filter is also every 12 months, like similarly as sediment and carbon filters.

More From My Blog